
Why Is My Fence Leaning? Causes, Fixes and When to Call a Pro
Fence leaning after a storm or wet season? Learn the 5 common causes in North Texas, how leaning posts are fixed, and when to call a fence
17 years of proven success and experience
Request a FREE Quote and receive a 10% fall discount
Easton Fencing repairs cedar, wood and wrought iron fences and swing and slide gates across Celina, including fences another company installed. Many Celina homes are newer, and builder-grade fences can start leaning or loosening within a few years. Our in-house crews find the cause and fix it so it lasts.
Ready for a new fence instead? See our cedar fences in Celina or all of our Celina fence services.
More from Easton Fencing in Celina: wrought iron fences, automatic gates, cedar fences, or see everything we do on our Celina fence company page.
On many new-construction lots in Celina, fence posts were set shallow or in loose fill, and the clay soil works them loose as it swells and shrinks. We straighten the fence and reset or replace failed posts deep in concrete, then replace broken boards, rails and pickets.
We also repair wind and storm damage, sagging sections and rot at the ground line. Learn more in our leaning fence guide.
We fix sagging and dragging gates, loose hinges, latches that won’t catch and bent iron gate frames. On acreage and estate lots, we also repair automatic gate openers, sensors, keypads, remotes and solar setups.
Gate stopped working? Try the safe checks in our gate troubleshooting guide, then call us for anything electrical.
Call or send a few photos of the damage so we can get an idea of the repair before we visit.
We look at the posts, boards, panels and gate hardware to find the real cause.
We tell you plainly whether a repair will last or a section should be replaced.
Our crew resets posts in concrete and repairs or replaces the damaged parts.
We check every repaired section, gate and latch with you before we call the job done.
Easton Fencing has repaired and built fences across Collin County for 17 years. Our in-house crews know cedar, iron and gate systems, we are fully insured, and you get an honest answer on repair versus replacement before any work begins.
What our customers think about us and how we do our work!
Here are the cities we serve most often — we’re not limited to these, so call us today!
Answers to the questions Celina homeowners ask us most about fence and gate repair.
Builder-grade fences are often set with shallow posts, and Celina’s clay soil swells and shrinks with the weather, which loosens them. Easton Fencing resets or replaces the failed posts deep in concrete.
Yes. Easton Fencing repairs cedar, wood and iron fences and swing and slide gates in Celina no matter who installed them.
Yes, in most cases. If the boards and rails are sound, we straighten the fence and reset or replace only the failed posts.
Yes, including solar-powered openers on acreage. We repair openers, sensors, keypads and remotes. See our automatic gates in Celina.
Many repairs are finished in a single visit. Send photos or call (469) 544-9707 and Easton Fencing will give you a time frame up front.
Yes. Easton Fencing repairs fences and gates damaged by high winds, falling limbs and vehicle impacts across Celina and Collin County.
Check out some great news and informational articles.

Fence leaning after a storm or wet season? Learn the 5 common causes in North Texas, how leaning posts are fixed, and when to call a fence

Swing or sliding driveway gate? Compare space, slope, looks, automation and upkeep, plus driveway gate ideas for North Texas homes from Easton Fencing.

How to maintain a wood fence in North Texas heat, wind and clay soil: inspect, clean, stain, manage water and fix posts early. A seasonal cedar care

Board-on-board, side-by-side, shadowbox or horizontal? Compare privacy, looks, wind and upkeep for cedar fences in North Texas, from Easton Fencing.

Compare 6 estate fence styles for North Texas homes: iron, cedar, ranch rail, board-on-board and mixed designs. Pick the best fit for privacy or security.

Safety first troubleshooting for homeowners. Follow five safe checks to diagnose driveway gate power, command, sensor, and mechanical faults, and know…